Zircon MetalliScanner® MT6 metal locator, locate embedded metal before your drill bit or saw blade does. This powerful dedicated metal scanner is the tool you need if you are sawing concrete slabs or walls that contain rebar, conduit, or plumbing. It can locate metal up to 6 inches (152 mm) deep in solid concrete and other non-metallic surfaces. The MT 6 locates, and differentiates between, ferrous and non-ferrous metal and indicates the target depth in inches and centimeters. When approaching a metal object, a large plus (+) sign appears on the display. When the plus becomes a minus (−), the tool has crossed over the target and is now moving away.
For more information about Zircon stud finders and other products:
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. *
1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays)
Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (41 – 61 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting.
WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.
0 Comments